How the mulch calculator works
Mulch is a layer of a chosen depth, so the volume is the bed’s area times that depth. The calculator converts the depth from inches to feet, adds your extra percentage and divides by the volume of one bag.
Area (sq ft) = length × width (rectangle)
= π × (diameter ÷ 2)² (circle)
Volume (cu ft) = area × depth (in) ÷ 12
To buy (cu ft) = volume × (1 + extra %)
Bags = to buy ÷ bag size (cu ft), rounded up
Cubic yards = to buy ÷ 27Example: a 12 × 4 ft bed, 3 inches deep
The bed is 48 sq ft. At 3 in (0.25 ft) that is 12 cu ft, and 13.2 cu ft with 10% extra. With 2 cu ft bags: 13.2 ÷ 2 = 6.6, so 7 bags. In bulk it is about 0.49 cu yd.
How deep should mulch be?
Virginia Cooperative Extension’s guide to mulching recommends a 2 to 3 inch layer for trees and shrubs, 2 to 4 inches for mulch with larger particles, 1 to 2 inches for fine or double-shredded mulch and around annuals and perennials, and warns against letting mulch build up deeper than 4 inches. Mississippi State University Extension’s mulch table gives similar depths by material. Keep mulch away from tree trunks and plant stems.
Bag sizes
Bagged mulch is sold by volume, and sizes differ by brand: Scotts, for example, sells its Nature Scapes mulch in 1.5 and 2 cu ft bags. Enter the volume printed on your bag. One cubic yard is 27 cu ft: 13.5 bags of 2 cu ft, or 9 bags of 3 cu ft. In metric mode the bag size is in liters (2 cu ft ≈ 56.6 L).
Common mistakes
- Forgetting the depth unit. 3 inches is 0.25 ft, not 3 ft.
- Re-mulching at full depth. If old mulch is still there, enter only the depth you are adding.
- Counting a round bed as a square. A 6 ft circle is about 28 sq ft, not 36.
Limitations
One rectangular or round bed per calculation. For irregular beds, split them into rectangles and circles and add the results. Mulch settles over time, and bulk mulch is often measured loose, so real coverage varies.
Frequently asked questions
How many bags of mulch are in a yard?
13.5 bags of 2 cu ft, or 9 bags of 3 cu ft. A cubic yard is 27 cu ft.
How many bags of mulch for 100 square feet?
At 3 in deep, 100 sq ft needs 25 cu ft: 12.5, so 13 bags of 2 cu ft before any extra. At 2 in deep it is 16.7 cu ft, or 9 bags.
Last updated . Found an error? Let us know.